Grafting Tool 18.36USD |
Grafting Tape 2.5USD |
Grafting Blade 1.67USD |
Grafting Knob 2.04USD |
Pruning scissors 8.67USD |
Pruning scissors 9.1USD |
|
|
|
|
|
|
Clipping Tool 40.8USD |
Clipping Tape 1USD |
Clipping Nail 4.9USD |
Clipping Blade 1USD |
Clipping Shelf 0.01USD |
Clipping Shelf 0.07USD |
|
|
|
|
|
|
Fruit Tree Pruning Shears Grafting Cutting Tool
Features:
- More than 1000 Professinoal Gardener’s Choice
- The Product Export to more than 30 countries
- Your best choice for Grafting work
- Easy work, Saving Time, Saving Laborforce
- Rootstock and scion it is easy to match the U-cut and V-cut rapid healing
- Using easily and fastly. Grafting method than the traditional savings the time and effort
- Blade can be replaced
- Use the pruner to cut useless branches from the plan
- The diameter of branch or seedling for grafting is better between 3-13
- The width of grafting site is 2mm, the depth of grafting site is 10m
Note:
- Keep out of reach of children
- Do not use on dry or old hard wood
How to use:
- Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.
- Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.
- Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.
- Step 4: Use the pruner to cut useless branches from the plant.
- Step 5: The grafting tool with “V & U ” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Package Included:
- 1x Fruit Tree Pruning Shears Grafting Cutting Tool
- 3x Blade(U+2V)
- 1x Screwdriver
- 1x Wrench
- 1x Knob
- 1x Beautifully packaged box