KingDian 2.5 SATA SATA2 SATA3 SSD Most Competitive Series S100 8GB 16GB 32GB S200 60GB S400 120GB S280 240GB 480GB SSD
KingDian SSD Most Competitive Series, Your best choice!!!!
KingDian SSD – Top Seller – The Preferred Series
1. Best factory price
2. Good performance
3. Original Brand New
4. With 3 years Warranty(Replace new!!!)
5.Supports BCH 66-bits/1KB ECC
S100 8GB(real capacity7.44GB) SATA2 102.9/12.9MB/S
S100 16GB(real capacity14.88GB) SATA2 204.4/26.41MB/S
S100 32GB(real capacity 29.76GB) SATA2 218.0/52.27MB/S
S200 60GB(real capacity55.80GB) SATA3 440.5/68.4MB/S
S400 120GB(real capacity111.60GB) SATA3 551.8/211.6MB/S
S280 240GB(real capacity 223.20GB) SATA3 560.3/422.5MB/S
S280 480GB(real capacity446.40GB) SATA3 563.5/397.9MB/S
S100 8GB:
Capacity: 8GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):102.9/12.9MB/s
Form factor: according to S100 8GB standrad
Interface: SATA 1.5 / 2.0 3.0Gb/s
Fully compliant with SATA revision2.6, compatible with SATA 1.5/ 3.0Gb/s interface rates
Support ATA-7 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH ECC 72bits/1KByte
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S100 16GB:
Capacity: 16GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):204.4/26.41MB/s
Form factor: according to S100 16GB standrad
Interface: SATA 1.5 / 3.0 Gb/s
Fully compliant with SATA revision2.6, compatible with SATA 1.5/ 3.0Gb/s interface rates
Support ATA-7 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH ECC 72bits/1KByte
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S100 32GB:
Capacity: 32GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):218.0/52.27MB/s
Form factor: according to S100 32GB standrad
Interface: SATA 1.5 / 2.0 3.0Gb/s
Fully compliant with SATA revision2.6, compatible with SATA 1.5/ 3.0Gb/s interface rates
Support ATA-7 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH ECC 72bits/1KByte
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S200 60GB:
Capacity: 60GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):440.5/68.4MB/s
Form factor: according to S200 60GB standrad
Interface: SATA 1.5 / 3.0 / 6.0Gb/s
Fully compliant with SATA revision3.1, compatible with SATA 1.5/ 3.0/ 6.0Gb/s interface rates
Support ATA-8 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH 66-bits/1KB ECC.
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S400 120GB:
Capacity: 120GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):551/211MB/s
Form factor: according to S400 120GB standrad
Interface: SATA 1.5 / 3.0 / 6.0Gb/s
Fully compliant with SATA revision3.1, compatible with SATA 1.5/ 3.0/ 6.0Gb/s interface rates
Support ATA-8 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH 66-bits/1KB ECC.
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S280 240GB:
Capacity: 240GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):560/422MB/s
Form factor: according to S280 240GB standrad
Interface: SATA 1.5 / 3.0 / 6.0Gb/s
Fully compliant with SATA revision3.1, compatible with SATA 1.5/ 3.0/ 6.0Gb/s interface rates
Support ATA-8 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH 66-bits/1KB ECC.
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
S280 480GB:
Capacity: 480GB
SDRAM: Supports one module DDR3 up-to 4Gbits,standard 1Gbits
Sequential Data Read/Write Performance (Up to):563/397MB/s
Form factor: according to S280 480GB standrad
Interface: SATA 1.5 / 3.0 / 6.0Gb/s
Fully compliant with SATA revision3.1, compatible with SATA 1.5/ 3.0/ 6.0Gb/s interface rates
Support ATA-8 Command Set
PIO, DMA, UDMA(up to 6, dependant on host) supported
Asynchronous Signal Recovery
Commercial operating temperature range form 0 to +70 Centigrade
Flash management algorithm: global static and dynamic wear-leveling, bad block management algorithm
Supports ATA and SATA Interface power management and SMART (Self-Monitoring, Analysis and Reporting Technology)
ECC (Error Correction Code): Supports BCH 66-bits/1KB ECC.
Read endurance: unlimited
Data retention: 10 years
MTBF:1,500,000 Hours
Shipping:
1, We usually ship item out within 2-5 days after the payment cleared.
2, Please make sure your shipping address is correct.
3, Please kindly do not 1-3 low scores on shipping cause the overseas shipping will be affected
by many factors such as Customs processing, Post strike etc.
Tax issue:
As the Customs clearance process is different in different countries,if such kind of goods need
be collected tariff buyer needs to pay for the tariff. We usually ship item as "GIFT" to customer
with lower value, if you have any notes on it please let us know before shipment.
Contact us:
1, Working time: Monday- Saturday (Greenwich Time 2:30A.M-11:30A.M ) ( Pacific Time:6:30P.M-3:30A.M)
2, Please TM message only.
3, Please kindly contact us before any neutral or negative feedback, we would try our best help.
4, All messages will be answered within 1 business day. If you do not receive our reply, please kindly
re-sent your email and we will reply to you as soon as possible.
1:Our speed test is on the SATA3 interface
Difference between SATA I, SATA II and SATA III SATA I (revision 1.x) interface, formally known as SATA 1.5Gb/s , is the first generation SATA interface running at 1.5 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 150MB/s.
SATA II (revision 2.x) interface, formally known as SATA 3Gb/s, is a second generation SATA interface running at 3.0 Gb/s. The bandwidth throughput, which is supported by the interface, is up to 300MB/s.
SATA III (revision 3.x) interface, formally known as SATA 6Gb/s, is a third generation SATA interface running at 6.0Gb/s. The bandwidth throughput, which is supported by the interface, is up to 600MB/s. This interface is backwards compatible with SATA 3 Gb/s interface.
2:As different platform or software, the result will be a little difference(we usually use CrystaDisk and AS SSD Benchmark test Our SSD)
3: As we are factory and we use 1000KB=1MB for easy calculate, also we use a little space as the Bad Bolck Management software for SSD’s stable using, the real capacity will be: Capacity x 0.93, Pls notice that all of the SSD must have the Bad Block Management sofeware for its running well
4:As our SSD is new and just out of factory, maybe you will found the SSD can not see in "My computer", pls right click "My computer-Management-Device manager-disc drive" and see if can find our drives. Pls do the format and partition and use the SSD as the main disk but not slave drive or connect to USB device in the first time