Product Description Maytech Benjamin Vedder Electronic Speed controller VESC for electric longboard DIY skateboard
|
Application |
e-skateboard |
| BEC | 5V BEC |
| Lipo | 3-12Cells |
| Voltage | 8V-60V |
| Hardware version | 4.12 |
| Firmware version | 2.18 |
| Capacitors | 3pcs 680uf 63V |
| Dimension of VESC board | 60x40mm |
| Power wire | Silicon wire |
| Brand | Maytech |
Link of STLink for updating VESC firmware: Maytech STLINK USB for updating VESC firmware
Link of canbus cable for two VESCs: Maytech 4pin male connector Canbus connector for double VESC
(Test video of canbus cable: https://youtu.be/9IHTWp_mbNQ )
Link of remote and receiver: Maytech electric skateboard longboard mountainboard remote controller 2.4ghz and receiver electric offroad skateboard remote MTSKR1712
Features:
•Strong, Reliable and Progressive Electric Brakes
•Start from a stop with Unsensored Motors as if it was Sensored
•Many Safety Features such as Current Control and Temperature Control Features
•Sensored and Unsensored (FOC) Field Oriented Control allows your electric skateboard to run with barely any motor noise.
•Built in 5V BEC
•Voltage: 8V to 60V (Up to 3S to 12S LiPo Voltage)
•Current: Up to 240A for a few seconds or 50A continous
•Regenerative Braking
•Sensored or Sensorless operation
•Great start-up torque with sensorless motors
The VESC50A speed controller is only recommended for e-skateboard application.
We do not cover warranty for following cases:
1. remove shrinkable tube,
2. change cable
3. change firmware,
4. for other applications
