Descriprition
- 1. 100% Brand New and high quality.
- 2. Support NTSC video system.
- 3. Embedded mounting in rear bumper.
- 4. Snap-in design, it is easy to install.
- 5. High sensitivity and low power consumption.
- 6. High-definition and 170 degree wide viewing angle.
- 7. Water-proof, shock-proof and anti-jamming functions.
- 8. Applicable to variety of vehicles: car, truck, RV, etc.
- 9. It helps to avoid incidents and accidents abrasion well.
- 10. Its simple and modest design and small size won’t draw any attention.
- 11. This camera can give you a full sight of the back of your car when you are driving.
Specifications:
- 1. TV system: NTSC
- 2. Effective pixels: 628 x 582 Pixels
- 3. Sensing area: 5.78 x 4.19mm
- 4. Minimum illumination: 0.3Lux/F1.2
- 5. Lens angle: 170°
- 6. S/N ratio more than 48db(AGC-OFF)
- 7. Color: Black,White, Chrome, Silver
- 8. Video output: RCA CONNECTOR, 1.0VP-P, 75ohm
- 9. Current Consumption: ≤150mA
- 10. Power supply: DC 12V
- 11. Operating Temperature: -30°C to +50°C, RH95%
- 12. Storage temperature: -40°C to +60°C, RH95% Max.
- 13. Video cable length: 6m
- 14. Power supply cable length: 1.2m
Installation:
- Take out your stock license plate light at the back of your car.
- b. Fix the camera to where the stock license plate light was.
- c. Connect the built-in camera to the car license plate next to the reverse lights connected to the positive and negative poles, to obtain the power. ( red wire to positive and black wire to negative.)
- d. Connect the video cable of the camera to the extension cord.
- e. Connect the extension cord to your car monitor.
- f. When your car is reversing, you will see the reverse image
IF it is possible we suggest that you should go to the 4S store for installing the kits.
Package included:
- 1 x Car Front Camera
- 1 x Video Cable
- 1 x Power Cable
- 1 x User Manual
{