VINT-TT55501 ELM327 USB V1.5 modified for Ford ELMconfig CH340+25K80 chip HS-CAN / MS-CAN Support FORD models open hidden function Focus Mondeo Kuga MS-CAN support via toggle switch(MS-CAN / HS-CAN) ELM327 USB has full support to Ford specific diagnostic protocol MS-CAN. Majority of modern Ford modules are accessible only through this protocol. Support FORD models open hidden function. Besides added functionality for Ford, this device works as normal OBD2/EOBD code reader on all supported vehicles. Functions: * read/erase fault codes from ALL modules, including OBD2/EOBD * access modules on both HS-CAN and MS-CAN mode * read vehicle configuration * actuator tests * Live Data * injector coding * software updates * service procedures * force DPF regeneration * programming * coding * adaptations Supported software: ELMconfig Forscan FOCCCUS FF2 ELM327 USB V1.5 OBD2 you will be able to: •Read and clear diagnostic trouble codes •Air Flow Rate •display and read •Engine RPM •Vehicle Speed •Intake Air Temperature •Long Term Fuel Trim •Short Term Fuel Trim •Timing Advance •Oxygen Sensors •Fuel System status •and so much more! Our ELM327 USB V1.5 OBD2 scanner is compatible with FORD, MAZDA, BMW, VW, GM, AUDI, CHEVY, TOYOTA, , LEXUS, MERCEDES, HYUNDAI, KIA, MITSUBISHI,NISSAN, SUZUKI, JAGUAR, LAND ROVER, CHRYSLER, HONDA AND SO MUCH MORE! OBD2 protocols: SAE J1850 PWM(41.6Kbaud) SAE J1850 VPW(10.4Kbaud) ISO9141-2(5 baud init,10.4Kbaud) ISO14230-4 KWP(5 baud init,10.4 Kbaud) ISO14230-4 KWP(fast init,10.4 Kbaud) ISO15765-4 CAN(11bit ID,500 Kbaud) ISO15765-4 CAN(29bit ID,500 Kbaud) ISO15765-4 CAN(11bit ID,250 Kbaud) ISO15765-4 CAN(29bit ID,250 Kbaud) SAE J1939 CAN(29bit ID,250*Kbaud) CAN(11*bit ID,125*Kbaud) CAN(11*bit ID,50*Kbaud)